Review: John Boyne-Aitken – Sunday 21st July 2024
Note that whilst spindle turning is considered to be relatively safe, it is always advisable to wear a minimum of protective glasses and better still a face mask. It is...
Review: Ian Ethell – Sunday 23rd June, 2024
9-Axis Offset Honey Dipper with a Holder Ian provided a template which can be found in the Demo Downloads section. Step 1: For the dipper, Ian used a 30x200mm rowan...
Review: Emma Cook – Sunday 19th May, 2024
We were delighted to welcome back Emma Cook to give a full day’s demonstration. Emma demonstrated a decorative air-brushed square-edge platter, a square-edge lidded box, an LED table lamp, a...
Review: Martin Saban-Smith – Sunday 21st April, 2024
Martin demonstrated two items: a coloured bowl and a lidded box. Coloured Bowl For the bowl, Martin used a maple (possible sycamore) blank approximately 210mm x 75mm. The review will...
Review: Rob Till Demo – Sunday 17th March, 2024
Rob’s demonstration focussed on turning green wood. There were three parts to the demonstration: rough turning a bowl, a bird house turned from a log, and a vase. Preparing Green...